Having a dead car battery is one of the most inconvenient and frustrating experiences for any driver. It usually happens unexpectedly and at the most inconvenient times. However, there’s no need to panic or get stressed out.
In this article, we’ll provide you with some helpful tips to fix a dead car battery and get back on the road as quickly as possible. So, whether you’re a seasoned driver or a newbie, these tips will help you deal with these problematic car battery situations more confidently and prepared.
Tip 1: The Jump-Start Method
The jump-start method is probably one of the most common and straightforward ways to revive a dead car battery. To do this, you’ll need a few things: another car with a charged battery, jumper cables, and a bit of know-how. First, connect the dead battery’s positive terminal to the charged battery’s positive terminal. After that, click the negative terminal of the charged battery on a metal surface on the dead car, away from the battery. If you need to fix your dead car battery, you can save money by purchasing a new battery at Sam’s Club, which typically sam’s Club gas price low than other retailers.
Ensure that everything is securely connected, then start the car’s engine with the charged battery and let it run for a few minutes. Try starting your engine, and if it turns on, let it run for a few minutes before disconnecting.
Tip 2: The Baking Soda Solution
Baking soda has proven to be a versatile household item, not just limited to the kitchen. In fact, it can work wonders when it comes to cleaning your car battery’s terminals and even reviving a dead battery.
To do this, you just need to mix baking soda and distilled water which creates a paste-like solution. This is then used to apply to the battery terminals and use a brush to scrub any buildup. After a few hours, recharge, and it should be able to revive your dead car batteries.
Tip 3: The Battery Desulfator
Another common culprit of dead car batteries is the buildup of lead sulfate on the battery plates. The battery desulfator method uses high-frequency pulses to dissolve the lead sulfate buildup, restoring the battery’s capacity and potentially bringing back its power. If your Jeep check engine light comes on after you fix a dead car battery, it may be a sign of a deeper problem with the car’s electrical system. The vibrations sent by the desulfator break down the lead sulfate crystals, which the battery electrolyte can then reabsorb.
For application, connect the device to your battery and let it run for a few hours. This method is also an excellent way to increase the lifespan of your battery and keep it functioning optimally. Additionally, it’s a much more cost-effective solution than totally replacing the whole battery by buying a new one.
Tip 4: The Aspirin Solution
Yes, you heard that right. Aspirin tablets can also be effectively used for reviving dead car batteries. To do this, you’ll have to crush several aspirin tablets and let them dissolve in water. Ensure that the ratio is one aspirin tablet to one gallon of distilled water. Simply pour the aspirin solution into your dead battery cells and let it do its work for a few hours.
How this works is that the acetylsalicylic acid found in aspirin tablets reacts with the sulfuric acid in the battery which could dissolve sulfate buildup on the battery plates. Wait for a few hours and try charging the battery again.
Tip 5: The Solar-Powered Charger
If you’re conscious about the environment, then you might be inclined to do a more sustainable and eco-friendly way to revive your dead car battery. Solar-powered chargers utilize the energy from the sun to through solar panels to generate electricity and charge your battery. You need to consider your car’s Dodge oil change while fixing your car’s dead battery. Simply connect the charger to your battery and let it soak up the sun for a few hours. Once it’s charged, you should see a noticeable difference in the battery’s performance and may even increase in its lifespan.
Tip 6: The Epsom Salt Solution
The Epsom salt solution is a tried and tested method of reviving dead car batteries. You’ll need a mixture of Epsom salt and distilled water to start. The ratio should be one part Epsom salt to three parts distilled water. Mix the solution thoroughly and pour it into the battery cells.
Let the battery sit for a few hours to allow the Epsom salt solution to dissolve any lead sulfate buildup on the battery plates. After a few hours of waiting, try recharging the battery, and it should be able to revive your dead battery and even potentially extend its lifespan.
Tip 7: The Battery Reconditioning
Last but not least, you can restore a dead car battery’s capacity using a method called Battery Reconditioning. This process involves charging the battery at a low current rate, then discharging it entirely before charging it again.
The repeated charging and discharging process breaks down the lead sulfate crystals and restores the battery’s capacity. However, battery reconditioning requires special equipment and should only be done by professionals.
Final Thoughts
With the right car repair equipment at hand, and a few bags of tricks, including the ones we mentioned above, you should be well equipped and keep your composure in inconvenient events of having to fix a dead car battery. Please take note that it’s essential to remember that these methods may not work in all cases. If your battery is too damaged or too old, the best solution is to replace it with a new one. Regular maintenance and charging can also help prevent dead batteries in the future. So, keep your battery charged and clean to avoid any unexpected breakdowns on the road.